$7.99 Flat Rate Shipping
Set Descending Direction

Grid Grid 


Page  of 1
Stainless Steel Ball...

Stainless Steel Ball Lock Disconnect - Gas - 1/4" MFL

$11.99

Stainless steel liquid ball lock disconnect with 1/4" MFL threaded fittings - use a barbed swivel nut (K123) and hose clamp (k124) to attach gas tubing.

Stainless Steel Ball...

Stainless Steel Ball Lock Disconnect - Liquid - 1/4" MFL

$11.99

Stainless steel liquid ball lock disconnect with 1/4" MFL threaded fittings - use a barbed swivel nut (K123) and hose clamp (k124) to attach beverage tubing.

Ball Valve Stainless...

Ball Valve Stainless 1/2"

$20.99

…port stainless steel ball valves with a two-piece body and a lock out handle. Each end of the valve has 1/2" female pipe threads, and is suitable for applications where the temperature will be between -20 to 450 degrees F, and the pressure under 1000 psi. All internal contact points (body, ball, cap…

Ball Lock Soda Keg -...

Ball Lock Soda Keg - 3 Gallon New

$124.99

Brand new three gallon stainless keg with ball-lock fittings and pressure relief valve in the lid. Measures 18" tall by 10" wide.

NEW Ball Lock Soda...

NEW Ball Lock Soda Keg Dual Rubber Handle - 5 Gallon

$129.99

Brand new five gallon stainless keg with ball-lock fittings and pressure relief valve in the lid. Measures 25" tall by 10" in diameter. Features the classic dual rubber handles on top.Note that the poppets in these kegs are not removable and should be cleaned in place.

Ball Lock Keg Fridge...

Ball Lock Keg Fridge Conversion Kit

$79.99

…-brew ball lock keg. You must already have a kegging system like our 3 and 5 gallon new and used keg systems. This kit does not come with tubing or a liquid disconnect. You must also supply your own fridge and drill a hole through the door to install the beer shank. Make sure that the stainless 4" shank…

NEW Ball Lock Soda...

NEW Ball Lock Soda Keg Dual Rubber Handle - 2.5 Gallon

$129.99

Brand new 2.5 gallon stainless keg with ball-lock fittings and pressure relief valve in the lid. Measures approximately 15" tall by 10" wide. Features the classic dual rubber handles on top. Note that the poppets in these kegs are not removable and should be cleaned in place.

Ball Valve Stainless...

Ball Valve Stainless 3/8"

$16.99

…port stainless steel ball valves with a two-piece body and a lock out handle. Each end of the valve has 3/8" female pipe threads, and is suitable for applications where the temperature will be between -20 to 450 degrees F, and the pressure under 1000 psi. All internal contact points (body, ball, cap…

Draft Brewer New...

Draft Brewer New Ball Lock Keg

$149.99

WHY KEG YOUR BEER? • It saves you time! • You only need to clean, sanitize, and fill one container vs. 50+ bottles. • You can carbonate your beer faster - cut the time from weeks, to days • Kegging allows you to fine tune your level of carbonation to suit every beer style • It gives you…

Female Stainless...

Female Stainless Quick Disconnect x 1/2" FPT

$18.99

This features a 1/2" FPT on the other end for easy connectivity to almost everything. Made from 304 stainless steel. The quick disconnect will hold pressure for brewing applications when moving liquids at 60 psi or less.

Three-piece Ball...

Three-piece Ball Valve Stainless 1/2"

$28.99

3 piece ball valves are easy to take apart and clean. These valves are 316 stainless steel, full port with 1/2"NPT threads. The seals are made of Teflon to resist high temperatures. Comes with a locking handle to prevent accidental opening.

Three-piece Ball...

Three-piece Ball Valve Stainless 3/8"

$25.99

3 piece ball valves are easy to take apart and clean. These valves are 316 stainless steel, full port with 3/8" NPT threads. The seals are made of Teflon to resist high temperatures. Comes with a locking handle to prevent accidental opening.

Deluxe Nitro Keg...

Deluxe Nitro Keg System

$429.99

For use as a stand-alone system. This kit contains all of the equipment that's in #KX10, but with the addition of a new 5 gallon ball lock keg and a stainless steel diffusion stone. We have found that by using a diffusion stone to force beer gas into solution, you can circumvent the need to carbonate…

BeerGun Accessory...

BeerGun Accessory Kit

$24.99

Accessory kit for the Beer Gun with necessary tubing and fittings. Includes a liquid ball-lock disconnect, a 5 foot length of hose for your CO2 line with 1/4" stainless flare connectors on each end, one stainless 1/4" swivel nut, and a brass 1/4" NPT X 1/4" flare adapter. Also needed but not included…