$7.99 Flat Rate Shipping
  • 1-800-681-2739
Set Descending Direction

Grid Grid 


Page  of 1
Coupling 304 Stainless 1/2"

Coupling 304 Stainless 1/2"

$3.49

304 stainless steel.

90-degree Elbow Stainless 1/2" MPT x 1/2" FPT

90-degree Elbow Stainless 1/2" MPT x 1/2" FPT

$9.99

304 stainless steel street elbow.

Drip Tray 7" Shorty

Drip Tray 7" Shorty

$47.99

This tray is made of 304 stainless steel and fits one or two faucets. Easily unmounted for dumping and cleaning. The tray is 7" wide, 4.5" deep, and 1" tall; the backspalsh is 1" tall.

Drip Tray 13" Shorty

Drip Tray 13" Shorty

$64.99

Comfortably fits up to four faucets. This 304 stainless steel drip tray is 13" wide, 4.5" deep, and 1" high. The backspash is 2" high. The grate is removeable.

Drip Tray 13" backsplash w/ drain

Drip Tray 13" backsplash w/ drain

$94.99

This drip tray will comfortably contain up to four faucets. It is made of 304 stainless steel, and the grate removes for easy cleaning. The drain tube is 3/8" OD. The tray is 13" wide, 4.5" deep, and 1" high. The backspash is 14" tall.

Blichmann Hex Nipple - 1/2" NPT

Blichmann Hex Nipple - 1/2" NPT

$11.99

A high-quality, custom-made 304 stainless 1/2" NPT nipple with a 7/8" hex in the center. You can tighten the nipple safely and easily with a wrench.

Female Stainless Quick Disconnect x 1/2" FPT

Female Stainless Quick Disconnect x 1/2" FPT

$18.99

This features a 1/2" FPT on the other end for easy connectivity to almost everything. Made from 304 stainless steel. The quick disconnect will hold pressure for brewing applications when moving liquids at 60 psi or less.

Ball Valve Stainless 3/8"

Ball Valve Stainless 3/8"

$16.99

…degrees F, and the pressure under 1000 psi. All internal contact points (body, ball, cap and stern) are 316 stainless steel, all other metal parts are 304 stainless. Seat and washers are PTFE (teflon).

Ball Valve Stainless 1/2"

Ball Valve Stainless 1/2"

$20.99

…degrees F, and the pressure under 1000 psi. All internal contact points (body, ball, cap and stern) are 316 stainless steel, all other metal parts are 304 stainless. Seat and washers are PTFE (teflon).

Blichmann Fermenator Conical Fermentor - Standard Fittings

Blichmann Fermenator Conical Fermentor - Standard Fittings

$599.99

…valves* Folding carry handles* Beaded silicone lid seal* Channel-shaped legs: welded to tank wall exterior, with scratch-preventing pads on the feet* 304 stainless steel* 14 gauge flange; 16 gauge sidewall; 18 gauge cone

Blichmann Fermenator Conical Fermentor - Tri-Clamp Fittings

Blichmann Fermenator Conical Fermentor - Tri-Clamp Fittings

$824.99

…valves* Folding carry handles* Beaded silicone lid seal* Channel-shaped legs: welded to tank wall exterior, with scratch-preventing pads on the feet* 304 stainless steel* 14 gauge flange; 16 gauge sidewall; 18 gauge cone

Enoitalia Tall Stainless Stand for Adjustable Grape Crusher De-Stemmer

Enoitalia Tall Stainless Stand for Adjustable Grape Crusher De-Stemmer

$349.99

The Tall Stainless Steel Stand for manual De-Stemmers/Crushers is made from 304 Stainless Steel. The bottom of the chute is 32" off the floor and the top of the crusher/destemmer is 64" high on the tall stand. The chute is 12" wide at its outlet. Made for use with Enoitalia crushers and de-stemmers.

Enoitalia Standard Stainless Stand for Adjustable Grape Crushers

Enoitalia Standard Stainless Stand for Adjustable Grape Crushers

$299.99

The Enoitalita Stainless Steel Stand for manual De-Stemmers/Crushers is made from 304 Stainless Steel. The bottom of the chute is 15.5" off the floor and the top of the crusher/destemmer is 48" high on this stand. The chute is 12" wide at its outlet. Made for use with Enoitalia adjustable crushers and…

Stainless Steel Motorized Grape Destemmer

Stainless Steel Motorized Grape Destemmer

$1099.99

…Features:8" diameter x 32" length stainless steel destemming basketSemi-centrifugal—destemming basket does not rotateHopper with auger feedEntirely 304 stainless steel.33.5" x 19.5" Hopper

Perlick 630SS Forward Sealing Beer and Wine Faucet

Perlick 630SS Forward Sealing Beer and Wine Faucet

$59.99

Features: - Bearing Cup/follower: maintains uniform pressure on pivot ball to provide smooth operation of handle - 304 sanitary stainless steel for all parts that contact product. Protects flavor of beer or wine. - Floating forward sealing O-ring: front and rear sealing flats are contoured to provide…